Header Ads

ad

Fix ! Stuck on Download Mode All Nokia Ta-1089 / Ta-1046 / Ta-1116 / Ta-1032 & Nokia 6.1

Fix ! Stuck on Download Mode All Nokia Ta-1089 / Ta-1046 / Ta-1116 / Ta-1032 & Nokia 6.1





Fix ! Stuck on Download Mode All Nokia Ta-1089 / Ta-1046 / Ta-1116 / Ta-1032 & Nokia 6.1



Download Link of Adb Command


Commands

fastboot devices
fastboot getvar current-slot
fastboot --set-active=b
fastboot --set-active=a
fastboot reboot


How to

1. Download and install Nokia USB Drivers on your Windows PC.
2. Download Minimal ADB and fastboot to communicate with the device in download (fastboot) mode.
3. Connect the phone to the PC using a USB cable.
4. Open the Minimal ADB and fastboot folder and run “Open CMD here.bat”. It will open the Windows Command processor.
5. Check that your phone shows up by typing:
fastboot devices

The expected response is your device’s serial variety followed by the term fastboot.



If you get Associate in Nursing empty response, then your device isn't detected.

Please check the drivers.
6. One more test, reboot the phone.

As per a comment (below), this fastened a Nokia seven.1 without any loss of data.

Type the following and press Enter.
fastboot reboot

Your device can either start-up or return to transfer mode.

Good if it starts up, else continue with the steps below.
7. Now check your current boot slot, type:
fastboot getvar current-slot
8. Change to the inactive slot.

If your current slot (previous command) could be a, then run the subsequent command:


fastboot --set-active=b



If your active slot is b, then run the subsequent command:


fastboot --set-active=a
Some phones use the underscore “_” prefix for the slots.

In that case, modify the above commands with the underscore.

For example fastboot –set-active=_b
9. Reboot the phone using the fastboot command:
fastboot reboot
10. Your phone will show a warning “Can’t load Android system. Your data may be corrupt.

If you still get this message, you may need to perform a factory data reset and erase all user data stored on the device.


11. se volume keys to highlight “Factory data reset”. Then press the power key to select it.

Select affirmative on following screen to substantiate the information wipe.



If you're lucky, then your phone will start up normally after the reset.



In case the fix doesn't work, then you need to send the phone to Nokia care for service.



Alternatively, you'll be able to attempt with a distant software package flashing service that ought to block any likelihood of the problem being associated with software package.



Share this video with your friends, like if you enjoyed it. And don't forget to subscribe to my channel please! Subscribe I.T SPOT Offical Channel For More Awsome Videos, And Don't Forget To Click 👍 Button And Tap Bell 🔔 Icon After Subscribe.. 
============ THE I.T SPOT INFO ============ 
Connect with Us === 
Website - www.itspot.info Offical 
Sir Mubeen Offical Page - https://www.facebook.com/MuhammadMube... 

============ THE I.T SPOT INFO ==============  

About Us ============== I.T SPOT is a Platform About I,T & Technical, where you will find,Information Technology, Technical technological,Computer & Softwear Tips,Smart phone flashing & Complete Computer Courses videos & Articles on Youtube,DailyMotion Channel & Offical Website in Hindi/Urdu , New Video & Articles is Posted Every Week on Channels & Website :) 


 

No comments